Basically, there are more or less different printing techniques for the data line boxes being sold on the market. For a data line manufacturer, how to choose best efect to improve sales and advantages,packgaing take counts.

 1. Communicate with customers

The main purpose of our communication with our customers is to ask customers whether they need to design, what kind of materials they have, what kind of technology they have, how much they need to print, and then make quotations based on the overall requirements of the customers. After the customer is satisfied, he can proceed to the next step.

2. Choose paper

The general data line packaging box uses a relatively wide range of single powder paper, as well as gray plates, double copper paper, Kraft paper and plastic. The commonly used grams of single powder paper are: 80g, 105g, 128 g, 157g, etc.. These grams of paper are commonly used. Different data lines need to be designed according to different requirements, and then choose paper and process.

3. Printing

Printing is divided into color printing and four-color printing. The special color printing refers to the printing process that uses other color inks other than yellow, magenta, blue and black ink to copy the original color. Packaging printing often uses a special color printing process to print a large area of background color. Four-color printing is based on three subtractive primary colors(yellow, magenta, and Cyan) and black printed color pictures. The original color image used for printing must be colored into its own color separation film, plus a black color separation plate to correct the blue, magenta and yellow inks to increase the blackness of the printed image. These films are used to make four plates for four-color printing.

4. Tile

The paper and the tile are framed together, which is the first post-printing process of the offset face color box. The viscosity and compaction directly affect the efficiency and forming effect of the cassette. In order to avoid the corrugated height in the laminating process less extrusion damage, on the one hand, the cardboard can not be too soft, water content control under 14 %, on the other hand, the pressure of the press site, angle and speed to moderate.

5. Die-cutting

Die cutting refers to a process in which the entire paper can be cut into a box by later processing of prints. The die cutting process can make prints or other paper products into a die cutter according to pre-designed graphics. Thus, the shape of the printed matter will be shaped according to the plane requirements of the product. The die-cutting is to add a knife line to the original design drawing at the time of design, and then the paper tile will be used to press out the shape of the carton with a special die-cutting machine and the corresponding knife plate after being framed, which will be handed over to the next process..

6. Paste box

Place the box in the form of a sample or product effect map and glue the parts of the box that need to be connected to increase the firmness of the package. Then matched with hanging ropes, hooks and other packaging boxes are completed.

The following is the package delivery, above all the basic technology of the data line box production, we know that the box has a lot of exquisite patterns through the above process is impossible to achieve. The following we say the back of the printing process: the back of the process film, hot, silver, UV, bump, overoil and so on.

(1) Covering: A transparent plastic film is mounted on a paper product. The film cover is divided into "light film" and "dumb film." The surface effect of the photofilm is crystal bright, colorful, and does not change color for a long time. With a soft feel and colorful surface colors, it is a safe and environmentally friendly building material that can choose colors according to the changes in color feelings of the times. The matte film can be seen from the surface to distinguish the color. It is a foggy surface, and the matte surface is matte like a matte after the film is coated. It protects and increases the luster. It not only improves the gloss and fastness of printed materials, but also extends the service life of printed materials. At the same time, plastic films also play a protective role such as moisture-proof, water-proof, anti-fouling, wear-resistant, resistant to folding, and chemical corrosion.

(2) gilding: gilding is the heating of metal plates, the application of foil, and the embossing of gold characters or patterns on printed materials; It is mainly to improve the quality of the product.

(3) Hot silver: The principle of the process is basically the same as that of hot gold, but the materials selected by the two are somewhat different in appearance: one has a golden luster and the other has a silver luster.

(4) UV: UV refers to UV glazing, that is, ULTRAVIOLET, which uses ultraviolet irradiation to trigger an instantaneous photochemical reaction of UV glazing oil, forming a bright coating of a reticular chemical structure on the surface of a print, mainly increasing the brightness of the product and artistic effects. Protect the surface of the product, its high hardness, corrosion resistance to friction, not easy to appear scratches.

(5) Pressure bump: It is a printing method that does not use ink. It is to place the packaging box in a set of Gravure and relief plates corresponding to the text. Under a certain pressure, the two templates are pressed against each other. The process of making the box appear embossed concave and convex text and pattern, the function is to enhance the three-dimensional sense and artistic appeal of the print.

(6) Oils: That is, a layer of oil on the surface of the printed matter. The main purpose is to: 

1. Increase the brightness of the product and improve the grade of the product. 

2. Protect the product, achieve anti-scratch, anti-dirty ability. 

3. So that the product has a high degree of smoothness, the friction between the products is small.

The above is some of the basic and simple processes for the printing of general data line boxes, as well as some data line box customization classes that may have no need for different processes.