It is believed that the issue of moisture protection of cardboard boxes has always been a headache for most manufacturers of custom packaging boxes. Paper is very afraid of water, not only wet and just wet, it is not a point. Everyone should understand. Boiling of the carton will not only affect the design and process on the box and affect its beauty, but also seriously affect the overall structure strength of the box. Some customers put their boxes in their own warehouses, and after a period of time to prepare for use, they discovered that the boxes were all damp and deformed, and some boxes could not be opened at all. Did not seriously analyze the beginning of the customer's side also thought that it was the poor quality of the manufacturer's material when customizing the packaging. The customer looked at its warehouse carefully and knew that it was a wet problem in its own warehouse, although there was no water. But humidity can also be fatal to the box.

To avoid the same problem for other customers, Jiajie, a maker of custom boxes, printed it to tell everyone about how to do a good moisture-proof box. First of all, the packing box warehouse or factory must be sealable, because we know that when the rainy season, heavy fog or the temperature difference between day and night is relatively large weather is easy to damp. Secondly, the box must also leave a distance from the ground. We generally use wooden boards to overhead, because we want to leave a certain amount of air space below; We can also put a layer of adhesive paper between the package and the board to isolate the water vapor, which can avoid the impact of moisture on the ground. If the conditions are available, you can choose to install a dehumidifier, so that there is no need to worry about the product being damp. Generally more professional custom box manufacturers will have a wet room, will put the newly made box into the inside for wet, this is also conducive to the rapid drying of the product, and then store the wet box to the warehouse for storage or Direct delivery to customers.

Jia Jie printing as a 15 years of experience as a custom box manufacturers, in the area of moisture protection can be said to be very professional. After we have finished each batch of boxes will be humidified and then to the customer, and will instruct the customer to do a good moisture prevention measures. Some boxes are sealed with paper. In general, if you do this, if you do it well, you will not be damp.